Industrial filtration

FILTERS FOR COMPRESSED AIR / GASES

The filters Ultra-Filter DF are intended for the processing of compressed air or other gases in different areas of applications. A bayonet fixing between filter head and filter bowl allows for the element to be removed together with filter bowl. Little installation height for the filter element exchange is required. Besides energy cost savings by the filter design, the use of the Economizer offers further saving achievements through timely replacement of the used filter elements. The most cost effective replacement time for the filter element is calculated and LEDs signal the necessity for a “filter exchange”. With 9 sizes the Ultra-Filter covers the performance range from 35 to 1100 m³/h flow rate and hence conventional compressor capacities between 2 and 120 KW.

Three versions are available:

  • Standard (with Econometer and float drain)
  • Plus (with Economizer and float drain)
  • Superplus (Economizer with level-controlled condensate drain UFM-D)

More on:
DF Standard / Plus / Superplus

The innovative three-stage filter DF-T(hree) is used for the purification of compressed air and gases in smallest places. The unique filter element combines 3 purification stages in one filter housing– a coalescence filter, an activated carbon adsorber and a high performance particle filter. It achieves quality class 1 acc. to ISO 8573-1:2010. The DF-T is ideally suitable as terminal filter, where the highest quality of compressed air is necessary and only small place for installation is available.

More on:
DF-T Three-stage Filter

The DFX filters are intended for the processing of compressed air and gases in different industrial applications. The special design of the filter housing and filter element as well as the materials used allow an operation under extreme conditions. Applications under high and low operating temperatures and conditions with mechanical stress such as vibrations or shocks can be covered by the filter series.
The filter elements are available in 7 sizes that cover a performance range of a flow rate up to 600Nm3/h (for compressed air) at an operating pressure of 25 bar. The housing connections range from 3/8″ to 2″.Validated performance data acc. to ISO 12500-1 for reliable achievement of compressed air quality suitable due to the application acc. to ISO 8573-1.More on:
DFX High Pressure Filter for Extreme Conditions

A cyclone separator has to remove the abrasive contamination, like solid and liquid particles and aerosols from the flow of air pressure. The emphasis is set here on the removal of water, which due to a condensation in the aftercooler at this point increasingly show as droplets or splashing water. Because of its low differential pressure and simultaneously lowered requirement of energy the cyclone separator offers substantial cost savings. In addition the higher filtration efficiency takes a positive effect on the subsequent compressed air adsorption and refrigeration dryers as well as on the filters. The DF-C cyclone separators are available in seven sizes, which match the current compressor capacities and the connection sizes of the Donaldson compressed air filters as well as the refrigeration and adsorption dryer product range. In addition, they are integrated in the current compressed air filter housing generation as the “Standard” (equipped with time-controlled condensate drains) or “Superplus”-Version (equipped with Ultramat UFM-D level-controlled condensate drain).

More on:
DF-C Cyclone Separators

Ultradri SG-Z (carbon steel) separators are designed to remove liquid condensate from compressed air and gas. Integral swirl vanes allow for efficient liquid removal with low pressure drop. SG-Z housings incorporate an additional baffle plate to prevent carryover of condensate. Standard configurations are equipped with UFZ condensate drains while Superplus versions are equipped with Ultramat zero-loss drain valves.

More on:
Ultradri SG-Z Cyclone Separators

FILTER HOUSING FOR COMPRESSED AIR / GAS

SG standard housings are designed for the purification of compressed air and gases in an industrial operation. The flanged housings due to an optimized construction offer low differential pressures at high flow rates and as a standard equipped with an econometer and a pneumatic drain. A multitude of various housings with different connections, single or multiple, allow to match the requirements of the application, e. g. the compressor size. This product series offers 13 different housings ranging from a volume flow of 1080 m3 /h to 38400 m3 /h (related to 7 bar (ü) and 20°C). The SG standard filter housing conforms to the requirements of the European directive 87/404/EG for simple pressure vessels.

More on:
Filter Housing SG Standard silicone free

SG superplus housings are designed for the purification of compressed air and gases in an industrial operation. The flanged housings due to an optimized construction offer low differential pressures at high flow rates and as a standard equipped with an economizer and an electronically controlled drain. Between drain and housing a ball valve is installed. A multitude of various housings with different connections, single or multiple, allow to match the requirements of the application, e.g. the compressor size. This product series offers 13 different housings ranging from a volume flow of 1080 m3 /h to 38400 m3 /h (related to 7 bar (ü) and 20°C). he SG superplus housings conforms to the requirements of the European directive 87/404/EG for simple pressure vessels.

More on:
Filter housing SG Superplus

The silicone free SG filter housings were designed especially for applications in the paint industry – paint compatible. The filter ousings are free from substances that could cause defects in the paint and guarantees that solid particles that could cause contamination are deposited from the compressed air and gases. Due to an optimised construction the housings offer low differential pressures at high flow rates. A multitude of various housings with different connections, allow to match the requirements of the application, e.g. the compressor size.

More on:
SG Standard silicone free

The silicone free SG filter housings were designed especially for applications in the
paint industry – paint compatible. The filter housings are free from substances that could cause defects in the paint and guarantees that solid particles that could cause contamination are deposited from the compressed air and gases. Due to an optimised construction the housings offer low differential pressures at high flow rates. A multitude of various housings with different connections, allow to match the requirements of the application, e.g. the compressor size.More on:
The silicone free SG filter

FILTER COMPONENTS FOR COMPRESSED AIR AND GASES

DF Filter

The coalescence filters / particle filters for the removal of water and oil aerosols and solid particles from compressed air and gases in industrial applications. The filter elements are equipped with the innovative filtration technology UltraPleat® – a pleated high performance filter media to achieve high retention rates at lowest differential pressure, validated according to ISO12500 and for the reliable achievement of the compressed air quality according to ISO8573-1.
The depth filter for the removal of water, oil aerosols and solid particles from compressed air and gases in industrial applications. The filter elements type V possess the three-dimensional micro fibre fleece made of polyester, which works oil and waterrejecting.
The prefilter for the removal of oil, water and dust particles with absolute retention efficiency. The Ultraporex prefilter contains the highly porous sinter bronze filter medium. It ensures the retention of coarse solid and liquid particles. Retention rate, 100 % in gases; defined retention rate of particles larger than the pore size (25 μm).
The prefilter for the removal of solid contaminants in gases. The Ultrapoly prefilter contains the high porous, sintered polyethylene filter medium. Even finest dust particles and other contaminants in compressed air and gases are being removed effectively on the surface and in the depth of the filter medium. Contaminants down to the size of 25 μm particles, are being retained in the filter.

Adsorption filter for the removal of oil vapour, hydrocarbons and odours. The adsorption filter Ultrac A consists of 2 filter stages. At the adsorption stage oil vapour, hydrocarbons and odours are removed by activated carbon adsorption. Particles are removed at the depth filter stage, consisting of microfibre fleece. In addition, support fleece and an outer stainless steel support sleeve ensure proper fixation of the adsorption and filter stage. The flow direction through the filter is from inside to outside. At appropriate pre purification a residual oil content of < 0,003 mg/m³ is achieved.

More on:
Ultrac A Activated carbon filter

DFX High Pressure Filter for Extreme Conditions

The adsorption filter r Ultrac A consists of 2 flter stages. At the adsorption stage oil vapour, hydrocarbons and odours are removed by activated carbon adsorption. Particles are removed at the depth flter stage, consisting of microfbre fleece. in addition, support fleece and an outer stainless steel support sleeve ensure proper fixation of the adsorption and filter stage. The flow direction through the fillter is from inside to outside. At appropriate prepurification a residual oil content of < 0,003 mg/m³ is achieved.

More on:
Coalescence Filter AX

The filter elements MX are designed for the purification of compresses air or gases in industrial applications. Validated performance data acc. ISO 12500-1 ( oil aerosol retention) and ISO 12500-3 ( particulate retention) for relaible achievement of compressses air quality suitable to achieve ISO 8573-1 quality classes.

Due to a flow-optimised design of the filter element as well by assigned filter media and the advanced production technology, the differentia pressure is minimized and a continuosly high separation efficiency is ensured.
The filetr elements type MX are based on the three- dimensional micro fibre fleece made of coated borosilicate glass fibres, which works oil and water- repelent.

By using variuos filtration mechanismes such as retension by direct imapct, sieve effect and diffusion effect, liquid aerosols and solid particles down to the size od 0,01 µm are being retained in the filter.

More on:
Coalescence Filter MX

The filter elements type SX are designed for the purification of compressed air or gases in industrial applications.

Validated performance data acc. ISO 12500-1 ( oil aerosol retention) and ISO 12500-3 ( particulate retention) for relaible achievement of compressses air quality suitable to achieve ISO 8573-1 quality classes. Due to a flow-optimised design of the filter element as well by assigned filter media and the advanced production technology, the differentia pressure is minimized and a continuosly high separation efficiency is ensured. The filetr elements type MX are based on the three- dimensional micro fibre fleece made of coated borosilicate glass fibres, which works oil and water- repelent.

By using variuos filtration mechanismes such as retension by direct imapct, sieve effect and diffusion effect, liquid aerosols and solid particles down to the size od 0,01 µm are being retained in the filter.

More on:
Coalescence Filter SX

The filter elements VX are designed for the purification of compresses air or gases in industrial applications. Validated performance data acc. ISO 12500-1 ( oil aerosol retention) and ISO 12500-3 ( particulate retention) for relaible achievement of compressses air quality suitable to achieve ISO 8573-1 quality classes.

Due to a flow-optimised design of the filter element as well by assigned filter media and the advanced production technology, the differentia pressure is minimized and a continuosly high separation efficiency is ensured.
The filetr elements type SX are based on the three- dimensional micro fibre fleece made of coated borosilicate glass fibres, which works oil and water- repelent.

By using variuos filtration mechanismes such as retension by direct imapct, sieve effect and diffusion effect, liquid aerosols and solid particles down to the size od 0,01 µm are being retained in the filter.

More on:
Coalescence Filter VX

FILTRATION INSTRUMENTS

For more details – please contact our office.

AIR CONDITIONING DEVICE

For more details – please contact our office.

AIRCRAFT PREPARATION SYSTEM

For more details – please contact our office.

ADSORBER PAR OF OIL

HD high pressure filter housings are designed for compressed air and gas applications up to 400 bar. Each housing can accommodate any of our standard range of filter elements for your specific need. Flow capacities from 30 to 720 m³/h nominal at 7 bar g are available. Modifications on request.

More on:
HD-Pressure Filters

Ultradri SG-Z (carbon steel) separators are designed to remove liquid condensate from compressed air and gas. Integral swirl vanes allow for efficient liquid removal with low pressure drop. SG-Z housings incorporate an additional baffle plate to prevent carryover of condensate. Standard configurations are equipped with UFZ condensate drains while Superplus versions are equipped with Ultramat zero-loss drain valves.

More on:
Ultradri SG-Z Cyclone Separators

Donaldson-Ultrafilter
GRC – DONALDSON AUTHORIZED DISTRIBUTOR

Office:
ul. Porajowska 6 , 54-107 Wrocław

Address for invoicing:
ul. Kwiska 170, 54-210 Wrocław

e-mail: donaldson@grc.pl
www.donaldson.pl
tel: (+48) 730 791 730
fax: (+48) /71/ 722-01-70